Tires: 2 Brand New 15×6.00-6 15×6.00×6 Tubeless Type Turf Mower Tread, 4 Ply rating – check your existing tire Sidewall Wheels: Solid Gray Steel, 3″ Centered Hub, 3/4″ Special Bearing without grease fitting. Load capacity/speed: 595 lbs. Not for highway service; Replacement for Craftsman Mowers with front tire size 15×6.00-6.- Check your current tire sidewall size, Bearing/Bushing and Hub size for proper match Low hassle, low cost solution to repairing or replacing your Craftsman lawn tractor riding Mower tires
How to Measure a Tire
Tire Diameter Tire Diameter: 15 inchDark Gray Rim
Hub Length -Through center of the hub Hub Length: 3.00 inchCentered Hub
Bushing -Measure inside diameter of opening Bushing size / Bore size /Axle size: 3/4 inch
Tire Width Tire Width: 6 inchRim Diameter: 6 inch
1.What tire size number do I need Check the sidewall of your existing tire for the tire size number.
2.What bearing/Bushing size do I need Measure the inside diameter of the bearing or bushing on your existing wheel or the outside diameter of the axle it will be mounted on
3. What hub length do I need Measure the distance from the outside of one bearing/bushing to the outside of the other on your existing wheel. Tips: if your tape measure is too wide to fit through the bearing/bushing-place a pen or pencil through the bearing bushing and then measure that length.
4. Do I need a centered or offset hub A. Centered(symmetrical)=both sides of the hub on your existing wheel stick out the same distance and you can mount or install it either way. B. Offset=one side of the hub on your existing wheels sticks out farther than the other and this impacts how you mount or install it.
How to find correct replacement tire and rim for your lawn mowers Tire Specifications: Tire size:15X6.00-6Tire Type: Tubeless TireTire Diameter:15″Tire Width:6″Load Capacity:595lbs Rim/Wheel Specifications: Hub Length: 3 inchCentered HubBushing size / Bore size /Axle size: 3/4 inchTire Width: 6 inchRim Diameter: 6.00 inch
Before to purchase, please check your existing tire sidewall for tire, hub and bushing size to ensure proper replacement fit. 1.Check your existing tire sidewall for tire, hub and bushing size to ensure proper replacement fit. 2.what tire size number do I need 3.What Bearing/Bushing size do I need 4.Do I need a centered or offset hub 5.what hub length do I need